This Buna-N O-ring, constructed from premium Aluminum 6061, ensures reliable sealing in diverse industrial applications. Its precise dimensions provide exceptional performance and longevity.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.685" |
| Outside Diameter | 8.896" |
| Cross Section | 0.161" |
A high-performance industrial component, this Buna-N O-ring boasts an Inside Diameter of 2.685 inches, an Outside Diameter of 8.896 inches, and a Cross Section of 0.161 inches. Engineered from Aluminum 6061, known for its excellent corrosion resistance and machinability, it offers robust mechanical properties suitable for moderate temperature and pressure sealing applications. This material choice ensures compatibility with a wide range of fluids and environments where standard rubber seals may degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of any debris. 2. Carefully inspect the O-ring for any nicks, cuts, or defects before installation. 3. Gently stretch or compress the O-ring to fit into the groove, avoiding excessive force or sharp tools that could cause damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using damaged or defective O-rings. | Always perform a visual inspection of the O-ring before installation to ensure it is free from imperfections. |
| Over-stretching or kinking the O-ring during installation. | Install the O-ring with minimal stress, ensuring it lies flat within the groove without twisting or excessive deformation. |
| Installing O-rings into dirty or damaged grooves. | Thoroughly clean and inspect the sealing groove for any burrs or sharp edges that could compromise the O-ring's integrity. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic assemblies, Fluid power applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||