This high-performance Buna-N O-ring, crafted from robust Aluminum 6061, provides exceptional sealing capabilities. Engineered for demanding industrial environments, it ensures reliable fluid and gas containment.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 7.637" |
| Outside Diameter | 8.402" |
| Cross Section | 0.173" |
A high-performance industrial component, this Buna-N O-ring boasts an Inside Diameter (ID) of 7.637 inches and an Outside Diameter (OD) of 8.402 inches, with a precise Cross Section (CS) of 0.173 inches. The material composition of Aluminum 6061 offers excellent machinability and corrosion resistance, making it suitable for applications requiring a balance of strength and weight. Its robust design ensures effective sealing against a wide range of fluids and gases under moderate pressures and temperatures, commonly found in hydraulic systems, pneumatic equipment, and general industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring squarely within the groove to prevent twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using damaged or nicked O-rings. | Inspect O-rings for any surface imperfections before installation. Replace any damaged components. |
| Over-stretching or twisting the O-ring during installation. | Gently guide the O-ring into its groove, ensuring it lies flat and is not twisted, which can compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Pneumatic Actuators, General Machinery Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||