This industrial O-ring, constructed from robust Buna-N material with an Aluminum 6061 core, provides superior sealing performance. Engineered for durability and chemical resistance in critical applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.877" |
| Outside Diameter | 6.353" |
| Cross Section | 0.097" |
Precision-manufactured to tight tolerances, this Buna-N O-ring features an inside diameter of 9.877", an outside diameter of 6.353", and a cross-section of 0.097". The Aluminum 6061 core offers excellent structural integrity and corrosion resistance, making it suitable for moderate pressure applications. Buna-N (Nitrile Butadiene Rubber) exhibits good resistance to oils, fuels, and many hydraulic fluids, ensuring reliable sealing across a range of industrial operating conditions. Its durometer hardness provides a balance of compressibility and resilience for effective gap sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Apply a thin film of compatible lubricant if necessary to facilitate installation and proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive compression and premature failure. | Tighten fasteners incrementally to the specified torque value, ensuring even pressure distribution across the O-ring. |
| Using incompatible lubricants that degrade the Buna-N material. | Consult material compatibility charts and use only lubricants specifically approved for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic assemblies, Automotive seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||