Engineered for demanding industrial applications, this Buna-N O-ring provides reliable sealing. Its robust construction and precise dimensions ensure performance in critical fluid and gas systems.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.792" |
| Outside Diameter | 6.060" |
| Cross Section | 0.179" |
A high-performance industrial component, this Buna-N O-ring boasts a precise inside diameter of 0.792 inches, an outside diameter of 6.060 inches, and a cross-section of 0.179 inches. Manufactured from Aluminum 6061, it offers excellent machinability and a favorable strength-to-weight ratio, making it suitable for applications requiring moderate temperature resistance and good resilience. This material choice enhances durability and compatibility in various industrial settings where robust sealing is paramount, preventing leaks in hydraulic, pneumatic, and general fluid transfer systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the smaller diameter of the mating part or into the groove. 3. Verify the O-ring is seated evenly and without twists within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing extrusion or permanent deformation of the O-ring. | Adhere to specified torque values for all fasteners to ensure proper compression without overstressing the seal. |
| Using the wrong lubricant or installing the O-ring dry, leading to friction damage. | Apply a compatible lubricant recommended for Buna-N and the specific application to facilitate installation and prevent initial wear. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Transfer Lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||