Engineered for superior sealing performance, this Buna-N O-ring offers exceptional resistance to fuels, oils, and hydraulic fluids. Its robust construction ensures reliable operation in critical industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.959" |
| Outside Diameter | 7.240" |
| Cross Section | 0.088" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Outside Diameter of 7.240 inches, an Inside Diameter of 9.959 inches, and a Cross Section of 0.088 inches. Constructed from Nylon-reinforced Buna-N (Nitrile Butadiene Rubber), it provides excellent resistance to abrasion, petroleum-based oils, hydraulic fluids, water, and many other chemicals. This material composition makes it ideal for applications requiring durable, long-lasting seals in moderate temperature ranges, ensuring consistent performance and preventing leakage in dynamic and static sealing scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force. 3. Gently seat the O-ring into the groove, ensuring no twists or kinks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to premature failure. | Apply only enough force to seat the O-ring, avoiding excessive stretching or compression. |
| Using the wrong O-ring material for the application's chemical or temperature environment. | Always verify material compatibility with the specific fluids and operating conditions before selection. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Automotive fuel systems, Pneumatic cylinders, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||