This industrial O-ring, manufactured from robust Polycarbonate, offers superior sealing in diverse environments. Its precise dimensions ensure a secure fit and reliable performance in critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.334" |
| Outside Diameter | 9.290" |
| Cross Section | 0.230" |
Engineered for reliability and performance, this Buna-N O-ring features an Inside Diameter of 3.334 inches, an Outside Diameter of 9.290 inches, and a 0.230-inch Cross Section. Constructed from Polycarbonate, it exhibits excellent resistance to abrasion, moderate temperature ranges, and certain chemicals, making it suitable for hydraulic systems, pneumatic actuators, and general fluid sealing where robust mechanical properties are paramount. The material's inherent toughness contributes to extended service life under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools that could cause nicks or cuts. 3. Seat the O-ring fully within the groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, leading to material degradation. | Always consult the material compatibility chart for the appropriate lubricant for Buna-N and Polycarbonate. |
| Forcing the O-ring into place with sharp objects, causing damage. | Use a plastic or wooden installation tool and ensure the O-ring is properly sized for the groove. |
| Overtightening fasteners, which can lead to O-ring extrusion. | Adhere to specified torque values for the assembly. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||