This industrial O-ring, crafted from robust Buna-N, ensures superior sealing performance. Its precise dimensions and durable material make it ideal for demanding applications requiring reliable containment.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.317" |
| Outside Diameter | 5.413" |
| Cross Section | 0.160" |
Manufactured under strict quality controls, this Buna-N O-ring features a precise inside diameter of 3.317 inches, an outside diameter of 5.413 inches, and a 0.160-inch cross-section. The material's excellent resistance to petroleum-based oils, greases, and hydraulic fluids, combined with its compatibility with Aluminum 6061, makes it a preferred choice for static and dynamic sealing in automotive, industrial machinery, and fluid power systems. Its operational temperature range and Shore A hardness ensure consistent performance across a variety of operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from burrs or sharp edges. 2. Lubricate the O-ring with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully place the O-ring into its designated groove, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring deformation or tearing. | Apply appropriate lubrication and gentle, consistent pressure to seat the O-ring properly. |
| Installing on dirty or damaged mating surfaces, compromising the seal integrity. | Thoroughly clean and inspect all sealing surfaces before O-ring installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic and pneumatic systems, Automotive fluid containment, Industrial machinery sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||