This industrial O-ring, fabricated from robust Polycarbonate, offers exceptional sealing capabilities. Its precise dimensions ensure a leak-proof fit in critical fluid and gas systems, providing long-term operational integrity.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.289" |
| Outside Diameter | 6.220" |
| Cross Section | 0.272" |
Engineered for reliability and performance, this industrial O-ring features an Inside Diameter of 3.289 inches, an Outside Diameter of 6.220 inches, and a Cross Section of 0.272 inches. The Polycarbonate material provides excellent resistance to a wide range of chemicals, oils, and moderate temperatures, making it suitable for demanding environments. Its Shore A hardness contributes to its resilience and ability to maintain a tight seal under pressure, preventing leakage in hydraulic, pneumatic, and general industrial applications where robust sealing is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect both the O-ring and the groove for any damage or debris. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent tearing. 3. Carefully install the O-ring into its designated groove, ensuring it sits without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Polycarbonate material. | Always consult a compatibility chart to select a lubricant specifically designed for Polycarbonate and the operating environment. |
| Overstretching or twisting the O-ring during installation, leading to premature failure. | Handle the O-ring gently and ensure it is seated squarely in the groove without undue force. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||