This robust Buna-N O-ring, constructed from corrosion-resistant 316 stainless steel, ensures superior sealing performance in critical industrial applications. Engineered for durability and reliability.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.976" |
| Outside Diameter | 5.359" |
| Cross Section | 0.164" |
Built to exacting engineering tolerances, this industrial O-ring features an Inside Diameter of 0.976 inches, an Outside Diameter of 5.359 inches, and a Cross Section of 0.164 inches. The 316 stainless steel construction provides exceptional resistance to a wide range of chemicals, extreme temperatures, and corrosive media, making it ideal for use in hydraulic systems, pneumatic equipment, and fluid power applications where robust sealing integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris or damage. 2. Lubricate the O-ring with a compatible lubricant to facilitate installation and prevent pinching. 3. Carefully install the O-ring into its designated groove, ensuring it is seated properly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants which can degrade the Buna-N material. | Always consult a chemical compatibility chart and use lubricants specifically rated for Buna-N and the operating environment. |
| Overstretching or twisting the O-ring during installation, leading to premature failure. | Handle the O-ring with care, ensuring it is installed straight and without excessive stretching. Gentle rotation during seating can help prevent twisting. |
A: This Industrial O-Ring, Buna-N is manufactured from 316 Stainless Steel.
A: Hydraulic cylinder sealing, Pneumatic actuator sealing, Fluid power system seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||