This high-quality industrial O-ring features a robust Buna-N sealing element within a durable 304 stainless steel housing. Engineered for superior chemical resistance and mechanical integrity.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.967" |
| Outside Diameter | 6.689" |
| Cross Section | 0.092" |
Engineered for reliability and performance, this industrial O-ring boasts a precise 6.967-inch inside diameter, 6.689-inch outside diameter, and a 0.092-inch cross-section. The Buna-N material offers excellent resistance to oils, fuels, and hydraulic fluids, while the 304 stainless steel housing provides exceptional corrosion resistance and structural support in harsh environments. This combination ensures a secure and long-lasting seal in applications requiring durability and chemical inertness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating groove and O-ring thoroughly to remove any debris or contaminants. 2. Carefully inspect the O-ring for any nicks, cuts, or damage before installation. 3. Apply a thin layer of compatible lubricant to the O-ring and the groove to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially damaging the O-ring. | Apply a suitable lubricant and use a gentle, consistent motion to seat the O-ring. |
| Installing a damaged or contaminated O-ring, leading to premature failure. | Always inspect the O-ring for defects and ensure both the O-ring and the groove are clean before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Pneumatic Systems, Fluid Power Equipment, Chemical Processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||