This industrial-grade Buna-N O-ring, manufactured from resilient Polycarbonate, offers exceptional sealing performance. Its precise dimensions ensure a reliable seal in demanding environments, preventing leaks and contamination.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.004" |
| Outside Diameter | 0.943" |
| Cross Section | 0.096" |
Precision-manufactured to tight tolerances, this Buna-N O-ring features an Inside Diameter of 3.004", an Outside Diameter of 0.943", and a Cross Section of 0.096". The Polycarbonate material provides excellent resistance to water, oils, greases, and many dilute acids and alkalis, making it suitable for a wide range of industrial applications. Its operational temperature range and chemical compatibility make it a robust choice for dynamic and static sealing requirements, ensuring long-term performance and reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or tools. 3. Gently seat the O-ring into its designated groove, ensuring uniform compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or permanent deformation. | Apply steady, even pressure, and utilize appropriate lubrication if necessary to ease installation without compromising the O-ring's integrity. |
| Incorrectly sizing the O-ring for the groove, resulting in a poor seal or premature failure. | Verify the O-ring's dimensions against the sealing groove specifications before installation to ensure a proper fit and optimal sealing performance. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic actuators, Fluid power equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||