This high-performance Buna-N O-ring, constructed from robust Aluminum 6061, offers exceptional sealing capabilities in demanding industrial environments. Its precise dimensions ensure a reliable and leak-free fit.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 7.051" |
| Outside Diameter | 3.368" |
| Cross Section | 0.177" |
A high-performance industrial component, this Buna-N O-ring is meticulously engineered for superior sealing in critical applications. With an Inside Diameter of 7.051 inches, an Outside Diameter of 3.368 inches, and a precise Cross Section of 0.177 inches, it provides an optimal fit within its designated groove. The material, Aluminum 6061, offers excellent corrosion resistance and good mechanical strength, making it suitable for moderate pressure and temperature ranges. This combination of material and dimensional accuracy ensures reliable performance in hydraulic systems, pneumatic assemblies, and general fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the groove and mating surfaces thoroughly to remove any debris or contaminants. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to prevent damage during installation. 3. Carefully install the O-ring into its designated groove, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring with care and ensure it is properly seated without undue stress. |
| Installing the O-ring into a contaminated or damaged groove. | Always inspect and clean the groove before installation to ensure a proper seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Pneumatic Assemblies, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||