This industrial O-ring, constructed from robust Buna-N with nylon reinforcement, provides superior sealing capabilities. Its precise dimensions ensure a tight fit in critical fluid and gas systems, offering exceptional durability and resistance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.742" |
| Outside Diameter | 7.238" |
| Cross Section | 0.230" |
Engineered for reliability and performance, this industrial O-ring features a 0.742-inch inside diameter, a 7.238-inch outside diameter, and a 0.230-inch cross-section. The Buna-N material offers excellent resistance to petroleum-based oils, fuels, and hydraulic fluids, while the integrated nylon reinforcement enhances its tensile strength and resistance to extrusion. This combination makes it ideal for high-pressure and demanding operational environments, ensuring a consistent and leak-free seal across a wide temperature range. Its chemical inertness and resilience contribute to extended service life in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs or damage. 2. Lubricate the O-ring and the groove with a compatible lubricant to facilitate installation and prevent tearing. 3. Carefully position the O-ring within the groove, ensuring it is seated uniformly without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or sharp tools during installation, leading to O-ring damage. | Employ gentle pressure and use rounded installation tools specifically designed for O-rings. |
| Incorrectly lubricating the O-ring or using an incompatible lubricant. | Always use a lubricant recommended for the specific O-ring material and application to avoid material degradation or seal failure. |
| Installing the O-ring without verifying the groove dimensions meet the O-ring specifications. | Thoroughly inspect and measure the groove dimensions to ensure they are within the manufacturer's recommended tolerances for the specified O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Automotive fuel systems, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||