This industrial O-ring, manufactured from robust Buna-N and designed for a 5.358" ID and 2.608" OD, ensures reliable sealing in demanding environments. Its precise dimensions and material composition offer excellent durability.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.358" |
| Outside Diameter | 2.608" |
| Cross Section | 0.236" |
A high-performance industrial component, this Buna-N O-ring features a precise inside diameter of 5.358 inches, an outside diameter of 2.608 inches, and a cross-section of 0.236 inches. The material, Aluminum 6061, provides a lightweight yet strong construction, exhibiting good corrosion resistance and machinability. Buna-N (Nitrile Butadiene Rubber) offers excellent resistance to oils, fuels, and many hydraulic fluids, making this O-ring suitable for a wide array of general-purpose sealing applications where moderate temperatures and pressures are encountered.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Verify the O-ring is seated evenly within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring stretching or tearing. | Gently stretch the O-ring, and use a plastic installation tool if necessary to prevent damage. |
| Installing on a dirty or damaged groove, compromising the seal integrity. | Thoroughly clean and inspect the groove for any imperfections or contaminants before installing the O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: General industrial sealing, Hydraulic systems, Pneumatic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||