This industrial O-ring, crafted from durable Buna-N and featuring an Aluminum 6061 housing, ensures reliable sealing. Its precise dimensions guarantee a leak-proof fit in critical applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.546" |
| Outside Diameter | 8.997" |
| Cross Section | 0.226" |
Precision-manufactured to tight tolerances, this O-ring boasts an Inside Diameter of 2.546 inches, an Outside Diameter of 8.997 inches, and a Cross Section of 0.226 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and many hydraulic fluids, while the Aluminum 6061 housing offers robust structural integrity and good corrosion resistance in many environments. This combination makes it ideal for static and dynamic sealing in applications where moderate temperatures and chemical exposure are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris. 2. Carefully place the O-ring into its designated groove, avoiding excessive stretching or twisting. 3. Apply light lubrication if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Carefully position the O-ring without stretching it beyond its elastic limit to prevent premature failure and loss of sealing capability. |
| Installing on dirty or damaged sealing surfaces. | Thoroughly clean and inspect both the O-ring groove and the mating surface for any imperfections that could compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic equipment, Automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||