This industrial O-ring features a robust Buna-N elastomer core reinforced with high-strength nylon. Engineered for superior sealing, it offers exceptional resilience and resistance to wear in demanding operational conditions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.014" |
| Outside Diameter | 9.610" |
| Cross Section | 0.133" |
A high-performance industrial component, this Buna-N O-ring is meticulously manufactured with a 2.014-inch inside diameter, a 9.610-inch outside diameter, and a 0.133-inch cross-section. The nitrile butadiene rubber (Buna-N) compound provides excellent resistance to petroleum-based oils, hydraulic fluids, and many common chemicals, while the integrated nylon reinforcement significantly enhances tensile strength, abrasion resistance, and reduces deformation under pressure. This combination makes it ideal for static and dynamic sealing applications requiring a durable and reliable solution in moderate temperature ranges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the mating groove and shaft for any debris, burrs, or imperfections. 2. Lightly lubricate the O-ring and groove with a compatible lubricant (refer to material compatibility charts). 3. Carefully install the O-ring, ensuring it sits flush within the groove without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Apply a compatible lubricant and carefully guide the O-ring into its groove, avoiding sharp edges and pinch points. |
| Installing an O-ring that is incompatible with the fluid or temperature of the application. | Always verify the material's (Buna-N) compatibility with the specific operating environment and fluids. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Automotive seals, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||