High-performance Buna-N O-ring engineered for robust sealing in demanding industrial environments. This component ensures reliable performance across a wide range of temperatures and pressures.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.890" |
| Outside Diameter | 10.997" |
| Cross Section | 0.144" |
Manufactured under strict quality controls, this industrial O-ring boasts a precise Inside Diameter of 1.890 inches, an Outside Diameter of 10.997 inches, and a Cross Section of 0.144 inches. Constructed from premium Buna-N (Nitrile Butadiene Rubber), it exhibits exceptional resistance to oils, fuels, hydraulic fluids, and many other chemicals, making it ideal for static and dynamic sealing applications where robust chemical compatibility and durability are paramount. The material's inherent toughness and resilience ensure long service life and consistent sealing integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the smaller diameter of the assembly or slide it into the groove, avoiding any sharp edges or excessive stretching. 3. Ensure the O-ring is properly seated and not twisted within the groove before engaging the mating parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or cuts in the O-ring. | Employ gentle, controlled movements and use appropriate installation tools to prevent damage to the sealing surface. |
| Installing a dry O-ring, which can cause friction and premature wear. | Always lubricate the O-ring and mating groove with a compatible lubricant to reduce friction and ensure smooth installation and operation. |
| Selecting an O-ring material with inadequate chemical resistance for the application fluid. | Thoroughly verify the chemical compatibility of Buna-N with all fluids and environmental conditions the O-ring will encounter. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic and pneumatic systems, Fuel and oil handling equipment, Automotive seals, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||