Engineered for robust sealing, this Buna-N O-ring, manufactured from Aluminum 6061, ensures reliable performance in critical industrial applications requiring precise fluid and gas containment.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.677" |
| Outside Diameter | 2.408" |
| Cross Section | 0.167" |
A high-performance industrial component, this Buna-N O-ring features a precise Inside Diameter of 1.677 inches and an Outside Diameter of 2.408 inches, with a substantial Cross Section of 0.167 inches. The Aluminum 6061 housing provides excellent corrosion resistance and structural integrity, ideal for applications exposed to a variety of chemicals and moderate temperatures. This design ensures a tight seal, preventing leaks and maintaining system efficiency across diverse operational parameters.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect both the O-ring and the sealing groove for any debris or damage. 2. Carefully install the O-ring into the designated groove, ensuring it is seated evenly. 3. Apply a light coat of compatible lubricant if necessary to facilitate installation and prevent pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring extrusion or tearing. | Employ gentle, even pressure and use appropriate tools if needed to avoid damaging the O-ring. |
| Incorrect O-ring size selection, resulting in improper sealing or premature failure. | Always verify the required dimensions against the O-ring's specifications before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic assemblies, Fluid transfer lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||