Engineered for robust sealing performance, this Buna-N O-ring offers exceptional resistance to oils, fuels, and solvents. Its precise dimensions ensure a reliable seal in demanding industrial environments, preventing leaks and maintaining system integrity.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.512" |
| Outside Diameter | 8.171" |
| Cross Section | 0.087" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Inside Diameter (ID) of 1.512 inches, an Outside Diameter (OD) of 8.171 inches, and a Cross Section (CS) of 0.087 inches. Fabricated from Buna-N (Nitrile Butadiene Rubber), this material is renowned for its excellent resistance to petroleum-based oils, hydraulic fluids, greases, and many aliphatic hydrocarbons. Its moderate temperature range and good abrasion resistance make it ideal for static and dynamic sealing applications in automotive, hydraulic systems, pneumatic equipment, and general industrial machinery where chemical compatibility is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from burrs or contaminants. 2. Carefully place the O-ring into its designated groove, ensuring it is not twisted or stretched beyond its elastic limit. 3. Apply a thin layer of compatible lubricant if necessary to facilitate assembly and prevent damage during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners causing excessive squeeze on the O-ring. | Tighten fasteners to the manufacturer's specified torque values to avoid over-compression, which can lead to premature failure. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Always verify lubricant and cleaning agent compatibility with Buna-N rubber before application. Consult material compatibility charts if unsure. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic and pneumatic cylinder seals, Fuel and oil line fittings, General industrial pump and valve seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||