This industrial O-ring, constructed from Aluminum 6061, offers exceptional sealing performance. Designed for reliability in various fluid and gas systems, it ensures leak-free operation under pressure.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.139" |
| Outside Diameter | 4.501" |
| Cross Section | 0.185" |
Specified by design engineers worldwide, this Buna-N O-ring exhibits a precise Inside Diameter of 1.139 inches and an Outside Diameter of 4.501 inches, with a consistent Cross Section of 0.185 inches. The material, Aluminum 6061, provides excellent corrosion resistance and good mechanical strength, making it suitable for moderate temperature applications. Its robust construction ensures reliable sealing in hydraulic, pneumatic, and general fluid transfer systems, offering a cost-effective solution for critical sealing requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris or sharp edges. 2. Carefully position the O-ring into its designated groove, avoiding stretching or twisting. 3. Assemble mating components, ensuring uniform pressure distribution across the O-ring surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing O-ring extrusion or damage. | Adhere to specified torque values for all fasteners to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult material compatibility charts and use only approved lubricants and cleaning solutions for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic cylinders, Fluid power equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||