This industrial Buna-N O-ring, crafted from Aluminum 6061, provides robust sealing solutions. Its precise dimensions ensure effective containment in critical fluid and gas systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.072" |
| Outside Diameter | 10.325" |
| Cross Section | 0.187" |
Precision-manufactured to tight tolerances, this Buna-N O-ring features an Inside Diameter of 1.072 inches, an Outside Diameter of 10.325 inches, and a Cross Section of 0.187 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, and many hydraulic fluids, making it ideal for moderate temperature applications. The Aluminum 6061 housing ensures dimensional stability and corrosion resistance, further enhancing its suitability for demanding industrial environments and applications where compatibility with aluminum components is essential.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Verify proper seating before assembling the mating component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently ease the O-ring into the groove, using a lubricant if necessary, to prevent permanent deformation and loss of sealing integrity. |
| Installing into a dirty or damaged groove. | Thoroughly inspect and clean the sealing groove. Address any nicks, burrs, or imperfections that could compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Pneumatic Systems, Fluid Transfer Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||