Engineered for reliability, this Buna-N O-ring, housed within a precision-machined Aluminum 6061 seal, provides exceptional performance in critical sealing applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 0.880" |
| Outside Diameter | 1.111" |
| Cross Section | 0.072" |
A high-performance industrial component, this O-ring features a Buna-N elastomer for excellent resistance to oils, fuels, and many hydraulic fluids. The integrated Aluminum 6061 housing offers superior strength, corrosion resistance, and thermal conductivity, ensuring stable performance across a range of operating temperatures. With an Inside Diameter of 0.880 inches, an Outside Diameter of 1.111 inches, and a Cross Section of 0.072 inches, this assembly is designed for precise fits in demanding fluid power systems, automotive applications, and general industrial machinery requiring dependable static and dynamic sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully install the O-ring assembly into the designated groove, avoiding any sharp edges or excessive stretching. 3. Verify proper seating and compression of the O-ring for optimal sealing performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially damaging the O-ring or groove. | Apply controlled pressure and use appropriate tools if necessary to avoid O-ring damage. |
| Installing on a contaminated or damaged sealing surface. | Thoroughly clean and inspect the sealing groove for nicks, burrs, or corrosion before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic and pneumatic cylinder seals, Fuel and oil system seals, Automotive engine and transmission seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||