This industrial O-ring, constructed with a resilient Buna-N sealing element and a precisely machined 6061 Aluminum housing, offers superior sealing performance in a wide range of fluid and gas applications. Engineered for durability and reliability.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.706" |
| Outside Diameter | 1.067" |
| Cross Section | 0.188" |
Trusted by engineers across multiple sectors, this industrial O-ring features a Buna-N elastomer for excellent resistance to oils, fuels, and hydraulic fluids. The housing is precision-machined from Aluminum 6061, providing good corrosion resistance and moderate strength. With an inside diameter of 0.706 inches, an outside diameter of 1.067 inches, and a cross-section of 0.188 inches, this assembly is ideal for static and dynamic sealing applications within moderate temperature and pressure ranges, commonly found in hydraulic systems, pneumatic equipment, and automotive components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both mating surfaces and the O-ring thoroughly to remove any debris or contaminants. 2. Carefully install the O-ring into its designated groove, ensuring it is seated evenly without twisting or stretching. 3. Assemble the mating component, applying light, even pressure to avoid pinching or damaging the O-ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to extrusion or excessive compression of the O-ring. | Adhere to specified torque values for all fasteners to ensure proper sealing pressure without over-compression. |
| Using a dry O-ring in a dynamic application, causing friction and premature wear. | Lubricate the O-ring with a compatible lubricant before installation in dynamic applications. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic cylinder sealing, Pneumatic actuator seals, Fuel and oil system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||