This industrial O-ring, constructed from robust Buna-N (Nitrile) rubber, offers superior sealing performance. Its precise dimensions ensure a reliable fit in critical fluid and gas systems, preventing leaks and contamination.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.190" |
| Outside Diameter | 6.850" |
| Cross Section | 0.157" |
Manufactured under strict quality controls, this Buna-N (Nitrile) O-ring features an Inside Diameter of 0.190 inches, an Outside Diameter of 6.850 inches, and a Cross Section of 0.157 inches. Buna-N is renowned for its excellent resistance to petroleum-based oils, fuels, hydraulic fluids, and water. Its wide operating temperature range and good abrasion resistance make it ideal for general-purpose sealing in industrial machinery, automotive components, and hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from burrs or damage. 2. Lubricate the O-ring and groove lightly with a compatible lubricant (e.g., silicone grease or petroleum jelly). 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Employ gentle pressure and a suitable lubricant to ease installation. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic Systems, Automotive Fuel Systems, Oil and Gas Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||