This high-performance Buna-N O-Ring, reinforced with nylon for enhanced durability, provides a robust seal for critical fluid and gas systems. Engineered for longevity and resistance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.148" |
| Outside Diameter | 2.768" |
| Cross Section | 0.268" |
Built to exacting engineering tolerances, this Buna-N O-Ring features an Inside Diameter of 6.148", an Outside Diameter of 2.768", and a Cross Section of 0.268". The Buna-N (Nitrile) material offers excellent resistance to oils, fuels, hydraulic fluids, and many solvents, while the nylon reinforcement significantly improves its tensile strength and abrasion resistance, making it suitable for high-pressure applications. This combination ensures a reliable and long-lasting seal in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully stretch the O-ring over the male component or into the groove, avoiding overstretching or abrasion. 3. Verify the O-ring is seated correctly and uniformly within its groove before assembling the mating component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently stretch the O-ring just enough to fit over the component or into the groove, minimizing stress. |
| Installing on dirty or damaged mating surfaces. | Thoroughly clean and inspect both mating surfaces for any nicks, burrs, or contaminants before installation. |
| Using incompatible lubricants or sealants. | Consult the material compatibility chart for Buna-N and use only recommended lubricants or sealants. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil lines, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||