This industrial Buna-N O-ring, constructed with a durable Nylon material, offers exceptional sealing performance. Engineered for reliability in critical applications, it provides a robust barrier against fluid and gas leakage.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.014" |
| Outside Diameter | 1.589" |
| Cross Section | 0.188" |
Specified by design engineers worldwide, this Buna-N O-ring features a precise 4.014-inch inside diameter, a 1.589-inch outside diameter, and a 0.188-inch cross-section. The Buna-N (Nitrile) material offers excellent resistance to oils, fuels, and hydraulic fluids, making it suitable for a wide range of industrial environments. Its inherent toughness and resilience ensure a long service life and consistent sealing integrity under moderate pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or damage. 2. Lubricate the O-ring and groove lightly with a compatible lubricant if necessary. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting. 4. Verify proper seating and inspect for any signs of damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to compression set and reduced sealing efficiency. | Install with appropriate tooling and avoid excessive force; ensure the O-ring is correctly seated without deformation. |
| Using an incompatible lubricant or cleaning solvent that degrades the Buna-N material. | Always consult material compatibility charts for appropriate lubricants and cleaning agents specific to Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Fuel and oil handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||