This robust Buna-N Nylon O-Ring provides exceptional sealing integrity in demanding industrial environments. Its precise dimensions and durable material ensure leak-free performance under various operating conditions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.089" |
| Outside Diameter | 5.868" |
| Cross Section | 0.271" |
Engineered for reliability and performance, this industrial O-ring features a precise Inside Diameter of 9.089", an Outside Diameter of 5.868", and a Cross Section of 0.271". Constructed from Buna-N (Nitrile Butadiene Rubber) with a nylon reinforcement, it offers excellent resistance to oils, fuels, hydraulic fluids, and general wear. This combination ensures superior sealing capabilities in applications requiring robust chemical and abrasion resistance. The nylon reinforcement enhances its structural integrity, making it suitable for higher pressure systems and environments prone to extrusion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the smaller component or into the groove, avoiding excessive stretching or twisting. 3. Gently seat the O-ring within the groove, ensuring it is not pinched or damaged by sharp edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently stretch the O-ring just enough to fit over the component or into the groove. Avoid pulling to its maximum elasticity. |
| Installing the O-ring without proper lubrication. | Apply a thin layer of O-ring compatible lubricant to the O-ring and the groove to facilitate installation and prevent damage. |
| Using the wrong O-ring material for the fluid medium. | Verify the chemical compatibility of Buna-N with the specific fluids, solvents, and temperatures encountered in the application. Consult material compatibility charts if unsure. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, Fuel Systems, Oil & Gas Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||