This industrial Buna-N O-ring, constructed from robust Nylon, offers exceptional sealing capabilities. Its precise dimensions ensure reliable performance in critical applications requiring durability and chemical resilience.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.345" |
| Outside Diameter | 5.193" |
| Cross Section | 0.225" |
Specified by design engineers worldwide, this Buna-N O-ring features an inside diameter of 9.345 inches, an outside diameter of 5.193 inches, and a cross-section of 0.225 inches. The advanced Nylon material composition provides superior abrasion resistance, high tensile strength, and excellent performance across a broad temperature range. Its inherent chemical inertness makes it ideal for applications involving oils, fuels, hydraulic fluids, and various solvents, ensuring long-term seal integrity and preventing leakage in demanding industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, avoiding stretching or twisting, ensuring it seats properly in the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure during installation. Utilize appropriate tools if necessary to avoid direct contact with sharp edges. |
| Installing an O-ring into a contaminated groove. | Thoroughly clean the groove and mating surfaces before O-ring installation to prevent seal compromise and premature failure. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, Fuel Lines and Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||