This industrial O-ring, constructed from durable Buna-N Nylon, provides superior sealing capabilities. Engineered for precise fit and long-term performance in critical systems, ensuring reliable operation.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.664" |
| Outside Diameter | 3.804" |
| Cross Section | 0.148" |
Built to exacting engineering tolerances, this Buna-N Nylon O-ring features an inside diameter of 5.664 inches, an outside diameter of 3.804 inches, and a precise 0.148-inch cross-section. The Buna-N (Nitrile) material offers excellent resistance to oils, fuels, and hydraulic fluids, while the nylon reinforcement enhances its tensile strength and abrasion resistance, making it suitable for moderate-pressure applications in automotive, hydraulic, and general industrial sealing where chemical compatibility and mechanical robustness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free of debris. Inspect the groove for any damage. 2. Carefully stretch the O-ring over the component, ensuring it seats evenly within the groove without twisting. 3. Apply a thin film of compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Twisting the O-ring during installation | Gently roll the O-ring into the groove, avoiding any twisting motion which can compromise the seal. |
| Using excessive force during installation | Apply only enough force to seat the O-ring. If resistance is high, re-inspect the groove and O-ring for obstructions or damage. |
| Installing on a dirty or damaged groove | Always clean and inspect the groove thoroughly before installation to prevent leaks and premature O-ring failure. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Automotive fluid seals, General industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||