This industrial O-ring, crafted from durable Buna-N Nylon, offers exceptional sealing performance in challenging environments. Precisely manufactured for reliable fluid and gas containment.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.656" |
| Outside Diameter | 0.988" |
| Cross Section | 0.203" |
Specified by design engineers worldwide, this Buna-N Nylon O-ring (6.656" Inside Diameter, 0.988" Outside Diameter, 0.203" Cross Section) provides superior resistance to abrasion, hydrocarbons, and moderate temperatures. Its robust nylon reinforcement enhances its mechanical strength and dimensional stability, making it ideal for high-pressure systems and demanding industrial machinery where seals are subjected to significant stress and potential wear. The Buna-N compound ensures excellent resistance to oils, fuels, and many chemicals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully stretch the O-ring over the smaller diameter of the mating part or into the groove, avoiding excessive stretching or the use of sharp tools. 3. Verify the O-ring is properly seated within the groove and is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a tool that nicks or cuts the O-ring during installation. | Employ a smooth, rounded installation tool or use finger pressure to seat the O-ring, ensuring no sharp edges contact the seal. |
| Over-stretching the O-ring, leading to premature failure. | Install the O-ring with the minimum necessary stretch, ensuring it fits snugly within the groove without deformation. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil lines, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||