This high-performance Buna-N Nylon industrial O-ring offers superior sealing capabilities in demanding environments. Engineered for reliability, its robust material composition ensures excellent resistance to wear and a wide range of chemicals.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.078" |
| Outside Diameter | 6.907" |
| Cross Section | 0.070" |
A proven choice for industrial professionals, this Buna-N Nylon O-ring is designed for critical sealing applications where durability and chemical resistance are paramount. Featuring an inside diameter of 3.078 inches, an outside diameter of 6.907 inches, and a precise 0.070-inch cross-section, it provides a secure and leak-proof seal. The Buna-N (Nitrile) material offers excellent resistance to oils, fuels, and many hydraulic fluids, while the nylon reinforcement enhances its mechanical strength and dimensional stability under pressure and temperature fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Gently stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Carefully seat the O-ring into the groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong O-ring size for the groove. | Always verify the O-ring dimensions (ID, OD, and cross-section) match the specified groove dimensions for optimal sealing. |
| Damaging the O-ring during installation. | Use appropriate tools and techniques to install the O-ring, avoiding sharp edges or overstretching that can cause nicks or tears. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Automotive sealing, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||