Engineered for superior sealing performance, this Buna-N O-ring, reinforced with a Nylon jacket, offers exceptional durability and chemical resistance in challenging industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.736" |
| Outside Diameter | 2.541" |
| Cross Section | 0.253" |
A high-performance industrial component, this Buna-N O-ring features a precise Inside Diameter of 5.736", an Outside Diameter of 2.541", and a robust Cross Section of 0.253". The Buna-N material provides excellent resistance to oils, fuels, and many hydraulic fluids, while the Nylon reinforcement enhances its structural integrity and abrasion resistance. This combination makes it ideal for static and dynamic sealing applications subjected to moderate temperatures and aggressive media, ensuring leak-free operation in pumps, valves, and hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding excessive force or sharp objects. 3. Verify the O-ring is seated correctly and uniformly within its intended location before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to compression set or damage. | Apply only sufficient force to seat the O-ring, ensuring a snug fit without deformation. |
| Using incompatible cleaning agents that degrade the Buna-N material. | Clean mating surfaces with mild soap and water or approved solvents recommended for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Automotive seals, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||