This industrial O-ring, crafted from robust Buna-N Nylon, ensures reliable sealing in demanding environments. Its precise dimensions provide a secure fit for critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.487" |
| Outside Diameter | 7.742" |
| Cross Section | 0.074" |
A high-performance industrial component, this Buna-N Nylon O-ring is engineered for superior sealing performance and durability. With an inside diameter of 4.487 inches, an outside diameter of 7.742 inches, and a precise 0.074-inch cross-section, it offers a highly effective seal in a wide range of industrial applications. The Buna-N material provides excellent resistance to oils, fuels, and certain solvents, while the integrated nylon reinforcement enhances its tensile strength and abrasion resistance. This combination makes it ideal for use in hydraulic systems, pneumatic equipment, automotive components, and general industrial machinery where a robust and long-lasting seal is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free from debris or sharp edges. 2. Lightly lubricate the O-ring with a compatible lubricant suitable for Buna-N. 3. Carefully insert the O-ring into the groove, avoiding twisting or stretching beyond its elastic limit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure and ensure the O-ring seats properly without deformation. |
| Installing the O-ring in a contaminated or damaged groove. | Thoroughly inspect and clean the groove before installation to prevent leaks and premature wear. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Equipment, Automotive Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||