This industrial O-ring, crafted from robust Buna-N Nylon, provides superior sealing performance. Its precise dimensions ensure a secure fit, preventing leaks in critical fluid and gas systems under demanding conditions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 8.521" |
| Outside Diameter | 7.984" |
| Cross Section | 0.231" |
Precision-manufactured to tight tolerances, this Buna-N Nylon O-ring features an Inside Diameter of 8.521 inches, an Outside Diameter of 7.984 inches, and a Cross Section of 0.231 inches. The inherent properties of Buna-N (Nitrile Butadiene Rubber) offer excellent resistance to oils, fuels, and many hydraulic fluids, while the integrated Nylon component enhances its structural integrity and abrasion resistance, making it suitable for high-pressure environments and applications requiring extended service life. This material combination ensures reliable sealing across a wide temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp objects. 3. Gently seat the O-ring into its designated groove, ensuring an even distribution and no twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to compression set and premature failure. | Apply just enough force to seat the O-ring in its groove; avoid crushing or deforming the seal. |
| Using incompatible lubricants that degrade the Buna-N material. | Always consult compatibility charts to select lubricants that are safe for Buna-N, such as silicone or petroleum-based greases. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Automotive fluid containment, Industrial machinery seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||