This industrial O-ring, constructed from robust Buna-N Nylon, offers superior sealing integrity. Engineered for critical applications, it provides reliable performance in challenging environments, ensuring leak-free operation.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.875" |
| Outside Diameter | 7.139" |
| Cross Section | 0.202" |
Specified by design engineers worldwide, this Buna-N Nylon O-ring is precision-manufactured to exacting standards. With an Inside Diameter of 1.875 inches, an Outside Diameter of 7.139 inches, and a Cross Section of 0.202 inches, it guarantees a precise fit. The Buna-N material offers excellent resistance to oils, fuels, and many hydraulic fluids, while the Nylon component enhances its structural integrity and abrasion resistance. This combination makes it ideal for dynamic and static sealing in a wide array of industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of burrs or foreign debris. 2. Lubricate the O-ring lightly with a compatible lubricant to prevent damage during installation. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, ensuring it sits flush.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or tools that can nick or cut the O-ring during installation. | Employ a rounded installation tool and apply gentle, even pressure. Ensure the O-ring is properly seated before assembly. |
| Installing on a contaminated or damaged groove surface. | Thoroughly clean and inspect the groove for any imperfections before installing the O-ring. Any damage can compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, Fuel and Oil Lines, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||