This industrial O-ring, crafted from high-quality Buna-N Nylon, offers superior sealing performance. Engineered for critical applications, it ensures reliable containment and protection against leaks.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.455" |
| Outside Diameter | 1.425" |
| Cross Section | 0.231" |
Specified by design engineers worldwide, this Buna-N Nylon O-ring is engineered for precision sealing in demanding industrial environments. Its compound offers excellent resistance to oils, fuels, and hydraulic fluids, making it ideal for a wide range of applications. The precise dimensions of a 1.455" inside diameter, 1.425" outside diameter, and a 0.231" cross-section ensure a tight, secure fit, preventing leakage under pressure and adverse conditions. Its robust nylon reinforcement enhances structural integrity and abrasion resistance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris. 2. Carefully inspect the O-ring for any nicks, cuts, or damage before installation. 3. Gently install the O-ring into the groove, avoiding stretching or twisting, to ensure a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a damaged or improperly sized O-ring. | Always visually inspect the O-ring for defects and verify it matches the specified dimensions before installation. |
| Over-stretching or twisting the O-ring during installation. | Carefully guide the O-ring into the groove without excessive force, ensuring it sits flat and untwisted. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||