This industrial O-ring, constructed from robust Buna-N and specified for an Aluminum 6061 housing, provides exceptional sealing capabilities in a wide range of environments. Its precise dimensions ensure a reliable fit.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.967" |
| Outside Diameter | 4.579" |
| Cross Section | 0.177" |
Manufactured under strict quality controls, this Buna-N O-ring features an Inside Diameter of 2.967 inches, an Outside Diameter of 4.579 inches, and a precise Cross Section of 0.177 inches. Buna-N (Nitrile) offers excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for general-purpose sealing in moderate temperature applications. The material's inherent resilience and good compression set properties contribute to its longevity and effectiveness in dynamic and static sealing scenarios within an Aluminum 6061 environment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the smaller diameter of the housing or component. 3. Gently roll the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, leading to excessive compression of the O-ring and premature failure. | Adhere to specified torque values for fasteners and consult assembly drawings for proper compression limits. |
| Using the wrong lubricant or no lubricant at all, causing friction and potential damage during installation. | Apply a compatible, manufacturer-recommended lubricant to the O-ring and groove before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Pneumatic Cylinders, Automotive Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||