This industrial O-ring, crafted from durable Buna-N (Nitrile), offers superior sealing performance in challenging operational settings. Its precise dimensions ensure a reliable fit for critical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 8.631" |
| Outside Diameter | 5.366" |
| Cross Section | 0.088" |
Designed for demanding industrial environments, this Buna-N O-ring provides exceptional resistance to oils, fuels, and hydraulic fluids. The material's inherent toughness and flexibility ensure a secure seal under significant pressure and temperature fluctuations. With an Inside Diameter of 8.631 inches, an Outside Diameter of 5.366 inches, and a Cross Section of 0.088 inches, this component is engineered for optimal performance in applications such as hydraulic systems, pneumatic assemblies, and fluid transfer lines where reliable leak prevention is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly dimensioned. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, avoiding any stretching or twisting, ensuring it seats fully within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and ensure the O-ring is properly seated before fully engaging the mating component. |
| Installing on a contaminated or damaged groove. | Thoroughly clean and inspect the groove for any burrs, nicks, or foreign material before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic cylinder seals, Pneumatic actuator seals, Fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||