This high-performance industrial O-ring, manufactured from robust Buna-N and reinforced with Nylon, ensures exceptional sealing integrity. Its precise dimensions guarantee reliable performance in critical systems.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.623" |
| Outside Diameter | 10.050" |
| Cross Section | 0.099" |
Engineered for reliability and performance, this industrial O-ring features an inside diameter of 1.623 inches, an outside diameter of 10.050 inches, and a cross-section of 0.099 inches. Constructed from Buna-N (Nitrile Butadiene Rubber), renowned for its excellent resistance to oils, fuels, and many hydraulic fluids, and further enhanced by a Nylon sheath for increased tensile strength and abrasion resistance, this seal is optimized for demanding industrial environments. The material's inherent resilience and chemical compatibility make it ideal for static and dynamic sealing applications where fluid containment and leak prevention are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean and inspect both the sealing groove and the O-ring for any debris, damage, or contamination. 2. Lightly lubricate the O-ring with a compatible lubricant, such as silicone grease or petroleum jelly, to facilitate installation and prevent pinching. 3. Carefully insert the O-ring into its designated groove, ensuring it sits flush and without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply moderate, even pressure and utilize lubrication to ease the O-ring into its groove. |
| Installing a contaminated O-ring or into a dirty groove, compromising the seal. | Always ensure both the O-ring and the sealing surface are scrupulously clean before installation. |
| Over-stretching or twisting the O-ring during installation. | Gently guide the O-ring into the groove, ensuring it maintains its original shape without distortion. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Automotive seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||