This industrial O-ring features a durable Buna-N elastomer for broad chemical resistance, housed within a 316 stainless steel ferrule for exceptional corrosion resistance and structural integrity in harsh industrial settings.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.502" |
| Outside Diameter | 8.860" |
| Cross Section | 0.136" |
Manufactured under strict quality controls, this O-ring boasts a precise 8.502" inside diameter, 8.860" outside diameter, and a 0.136" cross-section. The Buna-N (Nitrile Butadiene Rubber) offers excellent resistance to oils, fuels, and certain hydraulic fluids, while the 316 stainless steel provides superior corrosion resistance, particularly in saltwater or aggressive chemical applications. This combination ensures reliable, long-lasting sealing performance in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Carefully position the O-ring within the groove, avoiding any stretching or twisting. 3. Apply a thin layer of compatible lubricant to the O-ring and groove if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring excessively during installation. | Roll or carefully push the O-ring into the groove, minimizing radial stretch to prevent premature failure. |
| Using incompatible lubricants or cleaning agents. | Consult chemical compatibility charts to select lubricants and cleaning agents that are safe for Buna-N and 316 stainless steel. |
A: This Industrial O-Ring, Buna-N is manufactured from 316 Stainless Steel.
A: Hydraulic and pneumatic systems, Automotive and marine applications, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||