This robust Buna-N industrial O-ring provides reliable sealing solutions in challenging conditions. Engineered for durability and chemical resistance, it ensures effective containment in a wide range of applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 5.334" |
| Outside Diameter | 2.116" |
| Cross Section | 0.075" |
Designed for demanding industrial environments, this Buna-N O-ring offers exceptional resistance to oils, fuels, and hydraulic fluids. Its precise dimensions, featuring an Inside Diameter of 5.334 inches, an Outside Diameter of 2.116 inches, and a Cross Section of 0.075 inches, ensure a precise fit and superior sealing performance. The inherent toughness of Buna-N material contributes to its longevity and ability to withstand moderate temperatures and pressures, making it suitable for general-purpose sealing in automotive, hydraulic, pneumatic, and appliance systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into the groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong O-ring size. | Always verify the required O-ring dimensions (ID, OD, CS) against the groove specifications before installation. |
| Overtightening the component, leading to O-ring compression. | Tighten fasteners to the manufacturer's recommended torque specifications to prevent excessive O-ring deformation and premature failure. |
| Using sharp tools during installation. | Employ plastic or rubber installation tools to prevent nicks and cuts on the O-ring surface. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Automotive fuel systems, Hydraulic cylinder seals, Pneumatic actuators, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||