Engineered for robust sealing, this Buna-N O-ring provides exceptional performance in demanding industrial environments. Its resilient material ensures a tight seal against fluids and gasses.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.569" |
| Outside Diameter | 4.826" |
| Cross Section | 0.081" |
A proven choice for industrial professionals, this Buna-N O-ring is constructed from high-quality Nylon, ensuring excellent resistance to abrasion and moderate chemical exposure. With an Inside Diameter of 4.569 inches, an Outside Diameter of 4.826 inches, and a precise Cross Section of 0.081 inches, it is designed for a secure and leak-proof fit in a wide range of static and dynamic sealing applications within hydraulic, pneumatic, and general fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Carefully seat the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive stretching, ensuring it sits snugly within the groove. |
| Using incompatible lubricants that degrade the Buna-N material. | Consult a chemical compatibility chart and use only lubricants recommended for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Systems, General Fluid Power.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||