This industrial O-ring features a Buna-N sealing element within a robust 304 stainless steel housing. Engineered for high-pressure and harsh environments, it ensures dependable sealing in critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.963" |
| Outside Diameter | 2.572" |
| Cross Section | 0.127" |
Engineered for reliability and performance, this industrial O-ring boasts an exceptional Buna-N elastomer for superior chemical resistance and sealing properties, complemented by a durable 304 stainless steel construction for enhanced corrosion resistance and structural integrity. The precise dimensions of a 5.963-inch inside diameter, 2.572-inch outside diameter, and a 0.127-inch cross-section guarantee a precise fit and effective seal in its intended applications. This combination of materials and tight tolerances makes it suitable for demanding fluid power, chemical processing, and general industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect both the groove and the O-ring for debris or damage. 2. Lubricate the O-ring and the groove with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, ensuring no twisting or stretching occurs.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply moderate, even pressure. Use appropriate tools if necessary, ensuring they do not nick or cut the O-ring. |
| Incorrect O-ring material selection for the fluid or environment. | Always verify the chemical compatibility of Buna-N with the specific media and operating temperatures. Consult material compatibility charts. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Pneumatic Cylinders, Chemical Processing Equipment, Fluid Power Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||