This robust industrial O-ring, crafted from Buna-N and featuring an Aluminum 6061 housing, ensures reliable, high-pressure sealing in critical applications. Its precise dimensions guarantee a secure fit and exceptional performance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.890" |
| Outside Diameter | 10.339" |
| Cross Section | 0.085" |
A high-performance industrial component, this Buna-N O-ring is engineered for superior sealing integrity. The Aluminum 6061 housing provides excellent corrosion resistance and structural stability under demanding operational conditions. With an inside diameter of 3.890 inches, an outside diameter of 10.339 inches, and a precise cross-section of 0.085 inches, this component is designed for tight tolerances and leak-proof performance in hydraulic systems, pneumatic assemblies, and fluid handling equipment. Its material composition is optimized for resistance to oils, fuels, and many solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding sharp tools that could nick or puncture the sealing surface. 3. Gently seat the O-ring into the groove, verifying it lies flat and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Employ a stretching tool or lubricant to ease installation and prevent tearing. |
| Installing with a contaminated groove, compromising the seal. | Thoroughly clean the groove with a lint-free cloth and appropriate solvent before O-ring placement. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic cylinder sealing, Pneumatic actuator seals, Fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||