Engineered for robust sealing, this Buna-N O-ring features a precise 1.201" inside diameter, 8.916" outside diameter, and 0.235" cross-section. Its Aluminum 6061 construction ensures durability and resistance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.201" |
| Outside Diameter | 8.916" |
| Cross Section | 0.235" |
Specified by design engineers worldwide, this industrial O-ring is fabricated from Buna-N elastomer, renowned for its excellent resistance to oils, fuels, and hydraulic fluids. The supporting structure is precision-machined from Aluminum 6061, a high-strength, corrosion-resistant alloy offering superior mechanical integrity. With an inside diameter of 1.201 inches, an outside diameter of 8.916 inches, and a precise 0.235-inch cross-section, this component is designed for reliable sealing in static and dynamic applications across a wide temperature range, mitigating leakage and ensuring operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free of debris. 2. Carefully lubricate the O-ring and mating groove with a compatible lubricant. 3. Gently insert the O-ring into the groove, ensuring it is seated evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or deformation. | Apply gentle, consistent pressure and ensure proper lubrication to facilitate installation without undue stress on the O-ring. |
| Incorrectly sizing the O-ring for the groove, resulting in poor sealing or premature failure. | Verify that the O-ring's dimensions (ID, OD, and cross-section) precisely match the groove specifications to achieve optimal compression and sealing. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic and pneumatic systems, Automotive and aerospace fluid handling, Industrial machinery and equipment sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||