This robust Buna-N industrial O-ring, constructed with a Nylon element, delivers exceptional sealing performance in challenging environments. Its precise dimensions ensure a reliable fit for critical fluid and gas containment.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.603" |
| Outside Diameter | 3.108" |
| Cross Section | 0.247" |
Trusted by engineers across multiple sectors, this Buna-N O-ring (Nylon) exhibits excellent resistance to petroleum-based oils, fuels, and hydraulic fluids. With an Inside Diameter of 3.603", an Outside Diameter of 3.108", and a Cross Section of 0.247", it provides a dependable seal across a wide temperature range. Its inherent toughness and resilience make it a preferred choice for static and dynamic sealing in pumps, valves, and hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, which can cause excessive compression and premature failure. | Ensure the gland design provides adequate clearance and follow specified torque values for fasteners. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Always consult compatibility charts and use lubricants specifically approved for Buna-N applications. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Automotive Sealing, Industrial Pumps and Valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||