This industrial O-ring, constructed from robust Buna-N, is engineered for critical sealing applications. It provides exceptional resistance to oils, fuels, and hydraulic fluids, ensuring reliable performance in challenging environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.257" |
| Outside Diameter | 7.299" |
| Cross Section | 0.244" |
Specified by design engineers worldwide, this Buna-N O-ring offers superior sealing integrity. With an inside diameter of 6.257 inches, an outside diameter of 7.299 inches, and a precise cross-section of 0.244 inches, it meets stringent dimensional tolerances. Buna-N (Nitrile Butadiene Rubber) exhibits excellent resistance to petroleum-based oils, hydraulic fluids, greases, and water, making it ideal for a wide range of industrial fluid power systems, automotive applications, and general mechanical sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned for the specified O-ring. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant to prevent damage during installation. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting. Ensure it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, causing material degradation. | Always use a lubricant compatible with Buna-N and the media being sealed. |
| Overstretching or twisting the O-ring during installation, leading to premature failure. | Handle the O-ring with care and ensure it is installed without undue stress or distortion. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic and pneumatic cylinders, Fuel and oil systems, Automotive power steering and braking, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||