This industrial O-ring features a robust Buna-N elastomer seal within a 304 stainless steel housing. Engineered for superior sealing performance and durability in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.562" |
| Outside Diameter | 5.539" |
| Cross Section | 0.206" |
Engineered for reliability and performance, this industrial O-ring boasts a precise inside diameter of 5.562 inches, an outside diameter of 5.539 inches, and a cross-section of 0.206 inches. The Buna-N (Nitrile Butadiene Rubber) material provides excellent resistance to oils, fuels, and hydraulic fluids, while the 304 stainless steel housing offers exceptional corrosion resistance and structural integrity. This combination ensures a secure, leak-proof seal in high-pressure and chemically aggressive industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully install the O-ring into its designated groove, avoiding any stretching or twisting. 3. Ensure proper compression of the O-ring upon assembly to achieve a tight seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or deformation. | Adhere to specified torque values for fasteners to prevent over-compression and damage to the O-ring. |
| Using the wrong O-ring material for the specific fluid or operating temperature. | Verify O-ring material compatibility with the media and operating conditions before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic systems, Pneumatic systems, Fluid power transmission, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||