This high-performance Buna-N O-ring provides robust sealing for critical industrial applications. Engineered for excellent chemical and temperature resistance, ensuring reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.258" |
| Outside Diameter | 10.466" |
| Cross Section | 0.094" |
A high-performance industrial component, this Buna-N O-ring is precisely manufactured to exacting tolerances, featuring an inside diameter of 2.258 inches, an outside diameter of 10.466 inches, and a cross-section of 0.094 inches. The nitrile butadiene rubber (Buna-N) material offers superior resistance to oils, fuels, hydraulic fluids, and many solvents, making it ideal for static and dynamic sealing applications where exposure to these media is common. Its excellent abrasion resistance and resilience ensure long service life in moderate temperature ranges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully stretch the O-ring over the smaller diameter or into the groove, avoiding any nicks or cuts. 3. Verify proper seating and compression of the O-ring within its intended groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or tears. | Employ lubrication and gentle stretching to install the O-ring without damage. |
| Incorrect O-ring size selection, resulting in leakage or premature failure. | Always confirm the exact inside diameter, outside diameter, and cross-section required for the application. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Automotive fuel and oil systems, Industrial machinery seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||