This robust industrial O-ring, crafted from durable Buna-N material and a Carbon Steel housing, provides exceptional sealing in high-pressure and demanding environments. Engineered for precise fit and longevity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.805" |
| Outside Diameter | 8.079" |
| Cross Section | 0.244" |
Engineered for reliability and performance, this industrial O-ring boasts an Inside Diameter of 7.805 inches and an Outside Diameter of 8.079 inches, with a precise Cross Section of 0.244 inches. The Buna-N elastomer offers excellent resistance to oils, fuels, and many solvents, making it suitable for a wide range of chemical environments. The Carbon Steel housing provides superior structural integrity and dimensional stability, particularly in applications requiring robust support and resistance to extrusion. This combination ensures a secure, leak-free seal under challenging operational conditions, including moderate temperatures and pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the gland and mating surfaces for cleanliness and absence of debris. 2. Carefully place the O-ring into the gland, ensuring it is not twisted or overstretched. 3. Apply a light coat of compatible lubricant if necessary to facilitate seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or excessive force during installation, leading to O-ring extrusion or damage. | Apply only the necessary force to seat the O-ring properly. Refer to gland design specifications for recommended compression. |
| Using incompatible lubricants or cleaning agents that can degrade the Buna-N material. | Always consult the material compatibility chart for Buna-N and select lubricants and cleaning agents approved for its use. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic actuators, Fuel and oil lines, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||